001     1048387
005     20251202082555.0
024 7 _ |a 10.34734/FZJ-2025-04602
|2 datacite_doi
037 _ _ |a FZJ-2025-04602
041 _ _ |a English
100 1 _ |a Kaghazchi, Payam
|0 P:(DE-Juel1)174502
|b 0
|e Corresponding author
|u fzj
111 2 _ |a Material Development for Batteries (MDB)
|g MDB
|c Seoul
|d 2025-09-29 - 2025-10-03
|w South Korea
245 _ _ |a Zr Incorporation into Lithium Nickel Oxides: Solid Solution or Two-Phase System
260 _ _ |c 2025
336 7 _ |a Abstract
|b abstract
|m abstract
|0 PUB:(DE-HGF)1
|s 1764660042_21916
|2 PUB:(DE-HGF)
336 7 _ |a Conference Paper
|0 33
|2 EndNote
336 7 _ |a INPROCEEDINGS
|2 BibTeX
336 7 _ |a conferenceObject
|2 DRIVER
336 7 _ |a Output Types/Conference Abstract
|2 DataCite
336 7 _ |a OTHER
|2 ORCID
520 _ _ |a Ni-rich cathodes such as LiNiO2 (LNO) offer high theoretical capacities for Li-ion batteries, but their performance degrades upon cycling due to limiting factors such as microcracking, electrolyte decomposition, cation mixing and/or oxygen loss. A common strategy to mitigate these degradation mechanisms involves the use of doping and/or coating agents to enhance structural stability and capacity retention. Cobalt, alumina, and manganese – used in NCA and NCM cathodes – are well-known examples that improve cycling performance, although they reduce the overall theoretical capacity compared to pure LNO. Therefore, ongoing research aims to identify alternative doping and coating agents that can stabilize LNO while preserving its high theoretical capacity. Zirconium is a promising candidate, with studies reporting improved capacity retention when LNO is doped with small amounts of Zr. However, incorporating Zr into the LNO lattice remains challenging, even with low doping concentrations. This study focuses on the incorporation of Zr into LNO using electrostatic analysis and ab-initio density functional theory (DFT) calculation. We analysed the synthesis route using common precursor materials, which can yield either a mixture of pure LNO and Li2ZrO3 (LZO), or Zr-doped LNO (LixNiyZrZO2), potentially accompanied by second phases. Our DFT calculation demonstrate that both cases, namely LNO + LZO and Zr-doped LNO (+ second phase) are energetically favoured over the precursor materials. We proposed several chemical reactions pathways for Zr-concentrations ranging from 1% up to 7%. The results suggest that low amounts (1-3%) of Zr can be incorporated into LNO if a Ni-rich secondary phase is also present. For higher Zr concentrations (4%), stabilization within LNO requires an oxygen-rich environment, such as high partial oxygen pressure during synthesis. This observation holds true even for elevated synthesis temperatures (~ 750°C) as confirmed by ab-initio thermodynamic calculations. At Zr concentrations above 4%, we find phase separation into LNO and LZO rather than Zr doped LNO. This phase separation is likely detrimental, as LZO exhibits a large band gap (> 5 eV), whereas 3% Zr-doped LNO and pure LNO have significantly lower band gaps (~0.2 eV and 0.4 eV respectively). Electrostatic calculation for large particle-like atomistic structures with more than 3000 atoms further reveal that Zr-doped LNO is energetically more stable in elongated particle geometries compared to spherical ones. Additionally, Zr ions tend to stay segregate towards the particle surface. This preference could explain experimental observations of elongated primary particles in Zr-doped LNO and may correlate with improved mechanical integrity and enhanced capacity retention.In summary, this study provides theoretical insights into the synthesis challenges and structural advantages of Zr doping into LNO cathode materials. Our results indicate that Zr concentrations between 1-4% can be successfully incorporated under appropriate conditions, such as Ni-rich secondary phases or high oxygen partial pressure. These findings support the potential of Zr as a stabilizing dopant that retains the high capacity of LNO, offering guidance for future experimental efforts to further understand and develop advanced cathode materials for Li-ion batteries.
536 _ _ |a 1221 - Fundamentals and Materials (POF4-122)
|0 G:(DE-HGF)POF4-1221
|c POF4-122
|f POF IV
|x 0
536 _ _ |a AdamBatt - Fortschrittliche Materialien für die Anwendung in Hybriden Festkörperbatterien (13XP0305A)
|0 G:(BMBF)13XP0305A
|c 13XP0305A
|x 1
700 1 _ |a Winkler, Lars
|0 P:(DE-Juel1)195967
|b 1
|e First author
|u fzj
856 4 _ |u https://juser.fz-juelich.de/record/1048387/files/Abstract-Winkler-1.pdf
|y OpenAccess
910 1 _ |a Forschungszentrum Jülich
|0 I:(DE-588b)5008462-8
|k FZJ
|b 0
|6 P:(DE-Juel1)174502
910 1 _ |a Forschungszentrum Jülich
|0 I:(DE-588b)5008462-8
|k FZJ
|b 1
|6 P:(DE-Juel1)195967
913 1 _ |a DE-HGF
|b Forschungsbereich Energie
|l Materialien und Technologien für die Energiewende (MTET)
|1 G:(DE-HGF)POF4-120
|0 G:(DE-HGF)POF4-122
|3 G:(DE-HGF)POF4
|2 G:(DE-HGF)POF4-100
|4 G:(DE-HGF)POF
|v Elektrochemische Energiespeicherung
|9 G:(DE-HGF)POF4-1221
|x 0
914 1 _ |y 2025
915 _ _ |a OpenAccess
|0 StatID:(DE-HGF)0510
|2 StatID
920 1 _ |0 I:(DE-Juel1)IMD-2-20101013
|k IMD-2
|l Werkstoffsynthese und Herstellungsverfahren
|x 0
980 1 _ |a FullTexts
980 _ _ |a abstract
980 _ _ |a VDB
980 _ _ |a UNRESTRICTED
980 _ _ |a I:(DE-Juel1)IMD-2-20101013


LibraryCollectionCLSMajorCLSMinorLanguageAuthor
Marc 21