% IMPORTANT: The following is UTF-8 encoded. This means that in the presence
% of non-ASCII characters, it will not work with BibTeX 0.99 or older.
% Instead, you should use an up-to-date BibTeX implementation like “bibtex8” or
% “biber”.
@PHDTHESIS{Krieg:136392,
author = {Krieg, Dennis},
title = {{K}onzept und {K}osten eines {P}ipelinesystems zur
{V}ersorgung des deutschen {S}traßenverkehrs mit
{W}asserstoff},
volume = {144},
school = {RWTH Aachen},
type = {Dr.},
address = {Jülich},
publisher = {Forschungszentrum Jülich GmbH Zentralbibliothek, Verlag},
reportid = {PreJuSER-136392},
isbn = {978-3-89336-800-6},
series = {Schriften des Forschungszentrums Jülich. Reihe Energie und
Umwelt / energy and environment},
pages = {228 S.},
year = {2012},
note = {Record converted from JUWEL: 18.07.2013; RWTH Aachen,
Diss., 2012},
abstract = {Fuel cells and hydrogen have the potential to be essential
contributors for meeting the challenges of the future
traffic sector. The key challenges include: $\bullet$
reducing global and local emissions $\bullet$ reducing
import dependencies $\bullet$ preserving Germany’s
competitiveness $\bullet$ ensuring sufficient availability
of the energy carrier. Hydrogen is assumed to be the most
appropriate energy carrier, since it can be produced via any
primary energy and in terms of security is comparable to
natural gas. In the long run, renewable energy, e.g. via
wind power electrolysis, will make emission-free driving
feasible. In order to use hydrogen to fuel cars, a
comprehensive distribution infrastructure is required. This
is completely different than the case of conventional fuels
such as gasoline or diesel. Large amounts of hydrogen can be
transported in a gaseous state in pipelines, as is common
practice for natural gas. This option has not been examined
to date. In particular, at the moment no suitable material
has been identified for transporting hydrogen, which
degrades the stability of the pipe. The aim of this thesis
was to design a technical concept for a pipeline system that
would make it possible to supply hydrogen to fuel cell cars.
Using the assumptions of the study GermanHy, crucial
technical questions were investigated. These questions
comprise aspects such as general material requirements,
feed-in, transportation and feed-out of the hydrogen. With
respect to the material challenges, different potential
possibilities are provided in order to ensure that no
embrittlement will occur. Taking Germany as an example, the
design and length of the pipeline system were investigated
as well as the related economic and ecological aspects. A
Monte Carlo simulation was conducted in order to calculate
the probability density of both the investment and the
specific cost. These results were placed in the overall
context by calculating the economic impact of production,
storage and fuelling stations. This thesis, furthermore,
identified areas with a need for further research and
development. It was assumed that 14 sources will provide
hydrogen for 9,860 fuelling stations. The length of the
national transmission grid was calculated to be 12,000 km.
Transportation at the regional level will require a
distribution grid of 36,000 km. The overall expected costs
of the pipeline system are € 23 billion. Taking into
account compression, O\&M and electricity yields a specific
cost of € 0.79 €/kg H$_{2}$. Compared to values reported
in the literature, this is rather conservative.},
keywords = {Dissertation (GND)},
cin = {IEK-3},
ddc = {333.7},
cid = {I:(DE-Juel1)IEK-3-20101013},
typ = {PUB:(DE-HGF)11 / PUB:(DE-HGF)3},
url = {https://juser.fz-juelich.de/record/136392},
}