% IMPORTANT: The following is UTF-8 encoded.  This means that in the presence
% of non-ASCII characters, it will not work with BibTeX 0.99 or older.
% Instead, you should use an up-to-date BibTeX implementation like “bibtex8” or
% “biber”.

@PHDTHESIS{Neumann:15159,
      key          = {15159},
      othercontributors = {Neumann, Anita},
      title        = {{C}hrom-bezogene {D}egradation von
                      {F}estoxid-{B}rennstoffzellen},
      volume       = {98},
      issn         = {1866-1793},
      school       = {Ruhr-Universität Bochum},
      type         = {Dr. (Univ.)},
      address      = {Jülich},
      publisher    = {Forschungszentrum Jülich GmbH Zentralbibliothek,
                      Verfasser},
      reportid     = {PreJuSER-15159},
      isbn         = {978-3-89336-692-7},
      series       = {Schriften des Forschungszentrums Jülich : Energie $\&$
                      Umwelt / Energy $\&$ Environment},
      pages        = {XVI, 218 S.},
      year         = {2010},
      note         = {Record converted from JUWEL: 18.07.2013; Ruhr-Universität
                      Bochum, Diss., 2010},
      abstract     = {Solid Oxide Fuel Cells (SOFCs) offer a high potential for
                      application as an auxiliary power unit (APU) for heavy goods
                      vehicles as well as combined heat and power (CHP) sysems.
                      SOFCs are estecially attractive due to their high
                      efficiencies and th use of different fuel types. However,
                      otimization in terms of long term stability and costs are
                      still necessary. This work characterized the degradation of
                      SOFCs with lanthanum strontium manganite (LSM) cathodes
                      under chromium influence. Galvanostatic cell tests were
                      carried out at 800$^{\circ}$C with operation times from 250
                      - 3000 h and variation of the chromium source ans current
                      density. The current densities of j = 0 A/cm$^{2}$, j =
                      0,3A/cm$^{2}$ and j = 0,5 A/cm$^{2}$ were applied. the high
                      temperature ferritic alloy Crofer22APU was used as a
                      chromium source. Variation of the chromium source was
                      realized by coating the Crofer22APU insert with the chromium
                      retention layer Mn$_{3}$O$_{4}$ and the cathode contact
                      layer LCC10. [...]},
      cin          = {IEK-1},
      ddc          = {500},
      cid          = {I:(DE-Juel1)IEK-1-20101013},
      pnm          = {Rationelle Energieumwandlung},
      pid          = {G:(DE-Juel1)FUEK402},
      typ          = {PUB:(DE-HGF)11 / PUB:(DE-HGF)3},
      url          = {https://juser.fz-juelich.de/record/15159},
}