% IMPORTANT: The following is UTF-8 encoded.  This means that in the presence
% of non-ASCII characters, it will not work with BibTeX 0.99 or older.
% Instead, you should use an up-to-date BibTeX implementation like “bibtex8” or
% “biber”.

@ARTICLE{Ndlec:20198,
      author       = {Nédélec, R. and Uhlenbruck, S. and Sebold, D. and
                      Haanappel, V.A.C. and Buchkremer, H.P. and Stöver, D.},
      title        = {{D}ense yttria-stabilised zirconia electrolyte layers for
                      {SOFC} by reactive magnetron sputtering},
      journal      = {Journal of power sources},
      volume       = {205},
      issn         = {0378-7753},
      address      = {New York, NY [u.a.]},
      publisher    = {Elsevier},
      reportid     = {PreJuSER-20198},
      pages        = {157 - 163},
      year         = {2012},
      note         = {Record converted from VDB: 12.11.2012},
      abstract     = {The morphology of layers of fully yttria-stabilised
                      zirconia (YSZ) deposited by reactive magnetron sputtering
                      was studied with regard to their application as thin
                      electrolytes for solid oxide fuel cells (SOFC). A thin layer
                      of YSZ was deposited on top of anode substrates for SOFC.
                      The substrate comprises the warm-pressed anode itself, which
                      supports the complete cell, and an anode functional layer
                      deposited by vacuum slip casting, which is in direct contact
                      with the electrolyte. From previous experiments it is known
                      that non-assisted reactive DC magnetron sputtering produces
                      layers with rather high leak-rate even when depositing at
                      high temperatures. Residual pores on the substrates'
                      surfaces are responsible for the incomplete coverage by the
                      thin electrolyte and are detrimental to the cell's
                      performance. In the present paper, the effect of increasing
                      bias power applied to the substrate is studied. A clear
                      improvement of the layer morphology and gas-tightness can be
                      observed with increasing bias power. SOFC single cell-tests
                      show art improved performance with regard to standard
                      wet-ceramic processing routes. (C) 2012 Elsevier B.V. All
                      rights reserved.},
      keywords     = {J (WoSType)},
      cin          = {IEK-1 / IEK-3},
      ddc          = {620},
      cid          = {I:(DE-Juel1)IEK-1-20101013 / I:(DE-Juel1)IEK-3-20101013},
      pnm          = {Rationelle Energieumwandlung / SOFC - Solid Oxide Fuel Cell
                      (SOFC-20140602)},
      pid          = {G:(DE-Juel1)FUEK402 / G:(DE-Juel1)SOFC-20140602},
      shelfmark    = {Electrochemistry / Energy $\&$ Fuels},
      typ          = {PUB:(DE-HGF)16},
      UT           = {WOS:000301828300020},
      doi          = {10.1016/j.jpowsour.2012.01.054},
      url          = {https://juser.fz-juelich.de/record/20198},
}