TY  - JOUR
AU  - Engels, J.
AU  - Griesche, D.
AU  - Waser, R.
AU  - Schneller, T.
TI  - Thin film proton conducting membranes for micro-solid oxide fuel cells by chemical solution deposition
JO  - Thin solid films
VL  - 636
SN  - 0040-6090
CY  - Amsterdam [u.a.]
PB  - Elsevier
M1  - FZJ-2017-06515
SP  - 446 - 457
PY  - 2017
AB  - Micro solid oxide fuel cells (μ-SOFC) were manufactured with perovskite type proton conductors on silicon substrates and with structured Pt-grid electrodes. In order to miniaturize the μ-SOFCs and to shorten the ion path through the electrolyte, the thin film proton conductors were only ~ 510 nm thick. The thin films consist of 10 mol% yttrium-doped BaZrO3 (BZY10) and they were deposited by means of chemical solution deposition (CSD). CSD was applied, because it represents a highly attractive fabrication method, considering the relatively low investment costs and flexibility with regard to stoichiometry. The backsides of the μ-SOFCs on the substrates were opened by wet chemical and plasma etching to form the freestanding membranes. The completed μ-SOFCs resist up to a temperature of 450 °C. Their electrical properties, such as permittivity, and resistivity were investigated. By means of electrochemical impedance spectroscopy (EIS) in the temperature range of 100 °C to 450 °C, the resistivity properties and the activation energies of the model μ-SOFC were studied with humid hydrogen in nitrogen at the anode and different oxygen partial pressures at the cathode. The results provide a clear hint for a dominating protonic defect transport mechanism in the electrolyte. In the 450 °C measurement, the model μ-SOFCs reached an open circuit voltage of 600 mV with 100% oxygen at the cathode and humid hydrogen in nitrogen at the anode.
LB  - PUB:(DE-HGF)16
UR  - <Go to ISI:>//WOS:000408037800064
DO  - DOI:10.1016/j.tsf.2017.06.038
UR  - https://juser.fz-juelich.de/record/837636
ER  -