% IMPORTANT: The following is UTF-8 encoded.  This means that in the presence
% of non-ASCII characters, it will not work with BibTeX 0.99 or older.
% Instead, you should use an up-to-date BibTeX implementation like “bibtex8” or
% “biber”.

@ARTICLE{Unocic:851205,
      author       = {Unocic, K. A. and Bergholz, J. and Huang, T. and Naumenko,
                      D. and Pint, B. A. and Vaßen, R. and Quadakkers, W. J.},
      title        = {{H}igh-temperature behavior of oxide dispersion
                      strengthening {C}o{N}i{C}r{A}l{Y}},
      journal      = {Materials at high temperatures},
      volume       = {35},
      number       = {1-3},
      issn         = {1878-6413},
      address      = {Amsterdam [u.a.]},
      publisher    = {Elsevier Science},
      reportid     = {FZJ-2018-04905},
      pages        = {108 - 119},
      year         = {2018},
      abstract     = {To fabricate oxide dispersion strengthened bond coatings,
                      commercial $Co–30wt-\%Ni–20Cr–8Al–0•4Y$ powder was
                      milled with $2\%$ additions of Al2O3, Y2O3 or Y2O3 + HfO2.
                      Low-pressure plasma sprayed, free-standing specimens were
                      oxidised in air + $10\%H2O$ at 1100 °C both isothermally
                      (100 h) and in 500, 1−h cycles. Dry air cyclic testing
                      conducted at both ORNL and FZJ showed remarkably similar
                      results. In general, the water vapour addition caused more
                      scale spallation. Two LPPS specimens without oxide additions
                      were tested for comparison. The specimens with $2\%Al2O3$
                      addition exhibited the best behaviour as the powder already
                      contained $0•4\%Y.$ Additions of $2\%Y2O3$ and especially
                      $1\%Y2O3$ + $1\%HfO2$ resulted in over-doping as evidenced
                      by high mass gains and the formation of Y- and Hf-rich pegs.
                      Scanning transmission electron microscopy of the isothermal
                      specimens showed no Hf and/or Y segregation to the alumina
                      scale grain boundaries in the over-doped specimens.},
      cin          = {IEK-1 / IEK-2},
      ddc          = {620},
      cid          = {I:(DE-Juel1)IEK-1-20101013 / I:(DE-Juel1)IEK-2-20101013},
      pnm          = {113 - Methods and Concepts for Material Development
                      (POF3-113)},
      pid          = {G:(DE-HGF)POF3-113},
      typ          = {PUB:(DE-HGF)16},
      UT           = {WOS:000435483900013},
      doi          = {10.1080/09603409.2017.1389423},
      url          = {https://juser.fz-juelich.de/record/851205},
}