% IMPORTANT: The following is UTF-8 encoded.  This means that in the presence
% of non-ASCII characters, it will not work with BibTeX 0.99 or older.
% Instead, you should use an up-to-date BibTeX implementation like “bibtex8” or
% “biber”.

@INPROCEEDINGS{Udomsilp:885876,
      author       = {Udomsilp, David and Lenser, Christian and Guillon, Olivier
                      and Menzler, Norbert H.},
      title        = {{M}aterial development for operation of solid oxide cells
                      under specific conditions},
      reportid     = {FZJ-2020-04152},
      year         = {2020},
      abstract     = {Development of solid oxide cells (SOC) over several decades
                      has led to substantial enhancement of the cell performance
                      and a profound understanding of degradation mechanisms.
                      Moving past the basic limitations caused by design,
                      processing and microstructural issues, it becomes clear that
                      further progress requires application-oriented research
                      activities and cell designs. The optimum material
                      combinations and microstructure of a cell is likely to
                      differ depending on operational mode, intended operation
                      temperature and lifetime as well as between stationary and
                      mobile application. According to these boundary conditions,
                      various research topics have been tackled at
                      Forschungszentrum Jülich. On the basis of the well-known
                      anode-supported cell (ASC) concept, electrode development
                      and optimization of the electrolyte layer was performed
                      aiming at low-temperature operation (< 600 °C). By
                      implementation of a GDC electrolyte, for example, the ohmic
                      resistance was reduced by more than a factor of 3.
                      Investigation of highly active Ni/GDC cermets as fuel
                      electrode are another topic of investigation. First progress
                      achieved on metal-supported cells can be transferred for
                      ongoing work to further increase low-temperature performance
                      of ASCs. The material development is aided by
                      electrochemical testing of symmetrical cells and full-cells
                      and supported by theoretical considerations of the materials
                      elementary properties. (For details please refer to
                      Christian Lenser et al., Performance analysis of a planar
                      solid oxide fuel cell stack between 750 °C and 500 °C, J.
                      Power Sources 474 (2020), 228671,
                      https://doi.org/10.1016/j.jpowsour.2020.228671, and David
                      Udomsilp et al., Metal-Supported Solid Oxide Fuel Cells with
                      Exceptionally High Power Density for Range Extender Systems,
                      Cell Reports Physical Science 1 (2020), 100072,
                      https://doi.org/10.1016/j.xcrp.2020.100072)},
      month         = {Oct},
      date          = {2020-10-21},
      organization  = {14th European SOFC $\&$ SOE Forum
                       2020, Lucerne (Switzerland), 21 Oct
                       2020 - 23 Oct 2020},
      subtyp        = {After Call},
      cin          = {IEK-1},
      cid          = {I:(DE-Juel1)IEK-1-20101013},
      pnm          = {135 - Fuel Cells (POF3-135) / SOFC - Solid Oxide Fuel Cell
                      (SOFC-20140602)},
      pid          = {G:(DE-HGF)POF3-135 / G:(DE-Juel1)SOFC-20140602},
      typ          = {PUB:(DE-HGF)6},
      url          = {https://juser.fz-juelich.de/record/885876},
}