Dissertation / PhD Thesis

PreJuSER-10073

http://join2-wiki.gsi.de/foswiki/pub/Main/Artwork/join2_logo100x88.png Entwicklung und Herstellung von foliengegossenen, anodengestützten Festoxidbrennstoffzellen

Schafbauer, W.FZJ*

2010
Forschungszentrum Jülich GmbH, Zentralbibliothek, 2010 Jülich

Please use a persistent id in citations: http://hdl.handle.net/2128/3738

Abstract: Solid oxide fuel cells offer high potential in transforming the chemical energy of hydrogen or natural gas into electrical energy. Due to the high efficiency of fuel cells, lots of effort has been made in the improvement of net efficiency and in materials development during the last years. Recently, the introduction of high performance, low-cost production technologies become more and more important. At the Institute of Energy Research IEF-1 of Forschungszentrum Jülich, standard SOFCs were processed by time and work consuming methods. On the way to market entrance, product costs have to be reduced drastically. The aim of this thesis is the introduction of a high efficient low-cost processing route for the SOFC manufacturing. Therefore, the well-known and well established shaping technology tape casting was used for generating the anode substrates. As the first goal of this approach, two different tape casting slurries were developed in order to get substrates in the thickness range from 300 to 500 μm after sintering...

Note: Record converted from VDB: 12.11.2012
Note: Ruhr-Universität Bochum

---

Contributing Institute(s):

1. Werkstoffsynthese und Herstellungsverfahren (IEF-1)

Research Program(s):

1. Rationelle Energieumwandlung (P12)

Appears in the scientific report 2010

---

Database coverage:

---