% IMPORTANT: The following is UTF-8 encoded.  This means that in the presence
% of non-ASCII characters, it will not work with BibTeX 0.99 or older.
% Instead, you should use an up-to-date BibTeX implementation like “bibtex8” or
% “biber”.

@ARTICLE{GonzalezJulian:894253,
      author       = {Gonzalez-Julian, Jesus and Kraleva, Irina and Belmonte,
                      Manuel and Jung, Fabian and Gries, Thomas and Bermejo, Raul},
      title        = {{M}ultifunctional performance of {T}i 2 {A}l{C} {MAX}
                      phase/2{D} braided alumina fiber laminates},
      journal      = {Journal of the American Ceramic Society},
      volume       = {105},
      number       = {1},
      issn         = {1551-2916},
      address      = {Westerville, Ohio},
      publisher    = {Soc.},
      reportid     = {FZJ-2021-03128},
      pages        = {120 - 130},
      year         = {2022},
      abstract     = {The processing and characterization of laminates based on
                      Ti2AlC MAX phase, as matrix, and triaxial alumina braids, as
                      reinforcing phase, are presented. Ti2AlC powders with a mean
                      particle size below 1 µm are synthesized, while commercial
                      3M Nextel 610 alumina fibers are braided in a three-stage
                      process consisting of spooling, braiding with an angle of
                      0° and ±60° and the separation to single-layer fabric.
                      The laminates are processed by layer-by-layer stacking,
                      where 3 two-dimensional alumina braids are interleaved
                      between Ti2AlC layers, followed by full densification using
                      a Field-Assisted Sintering Technology/Spark Plasma
                      Sintering. The multifunctional response of the laminates, as
                      well as for the monolithic Ti2AlC, is evaluated, in
                      particular, the thermal and electrical conductivity, the
                      oxidation resistance, and the mechanical response. The
                      laminates exhibit an anisotropic thermal and electrical
                      behavior, and an excellent oxidation resistance at 1200℃
                      in air for a week. A relatively lower characteristic biaxial
                      strength and Weibull modulus (i.e., σ0 = 590 MPa and m = 9)
                      for the laminate compared to the high values measured in the
                      monolithic Ti2AlC (i.e., σ0 = 790 MPa and m = 29) indicates
                      the need but also the potential of optimizing MAX-phase
                      layered structures for multifunctional performance.},
      cin          = {IEK-1},
      ddc          = {660},
      cid          = {I:(DE-Juel1)IEK-1-20101013},
      pnm          = {1241 - Gas turbines (POF4-124)},
      pid          = {G:(DE-HGF)POF4-1241},
      typ          = {PUB:(DE-HGF)16},
      UT           = {WOS:000678783000001},
      doi          = {10.1111/jace.18043},
      url          = {https://juser.fz-juelich.de/record/894253},
}