Thermal Shock Induced Oxidation of Beryllium

Spilker, B.; Wirtz, M.; Pintsuk, G.; Linke, J.

doi:10.1088/1402-4896/aa90c2

Journal Article

FZJ-2017-07810

Thermal Shock Induced Oxidation of Beryllium

Spilker, B. (Corresponding author)FZJ* ; Linke, J.FZJ* ; Pintsuk, G.FZJ* ; Wirtz, M.FZJ*

2017
IoP Publ. Bristol

Physica scripta T170, 014055 - (2017) [10.1088/1402-4896/aa90c2]

This record in other databases:

Please use a persistent id in citations: doi:10.1088/1402-4896/aa90c2

Abstract: Beryllium has been chosen as a plasma facing material for the first wall of the experimental fusion reactor ITER, mainly because of its low atomic number and oxygen getter capabilities, which are favorable for a high plasma performance. While the steady state operational temperature of 250 °C has no deteriorating effect on the beryllium surface, transient plasma events can deposit power densities of up to 1 GW m−2 on the beryllium armor tiles. Previous research has shown that the oxidation of beryllium can occur under these thermal shock events. In the present study, S-65 grade beryllium specimens were exposed to 100 thermal shocks with an absorbed power density of 0.6 GW m−2 and a pulse duration of 1 ms, leading to a peak surface temperature of ~800 °C. The induced surface morphology changes were compared to a steady state heated specimen at the same surface temperature with a holding time of 150 s. As a result, a pitting structure with an average pit diameter of ~0.45 μm was observed on the thermal shock loaded surface, which was caused by beryllium oxide grain nucleation and subsequent erosion of the weakly bound beryllium oxide particles. In contrast, the steady state heated surface exhibited a more homogeneous beryllium oxide layer featuring small pits with diameters of tens of nm and showed the beryllium oxide grain nucleation in a beginning stage. The experiment demonstrated that thermal shock loading conditions can significantly accelerate the beryllium oxide grain nucleation. The resulting surface morphology change can potentially alter the fusion application relevant erosion, absorption, and retention characteristics of beryllium.

Classification: