Bücher

Single-crystal turbine blades made of nickel-based superalloys, such as CMSX-4, are of great importance for gas turbines due to their excellent high-temperature properties, however, they are subject to various damage mechanisms. Repairing these costly components is desirable for both ecological and economic reasons; however, it poses a challenge as the single-crystal microstructure in the repair area must be restored. [...]

Since renewable energy sources supply electricity with temporal fluctuations, efficient energy storage methods play a key role in bridging the gap between generation and consumption. Proton exchange membrane water electrolysis (PEM electrolysis) represents a central technical solution in this context. [...]

Climate change mitigation requires the rapid defossilisation of the German electricity sector. While energy system models are extensively used to evaluate climate change mitigation strategies, they generally consider environmental aspects in a limited manner, often focusing on direct operational emissions. [...]

The motivation for this best practice manual for research data management (RDM) resulted from many discussions and interviews that we conducted with users from the engineering and natural sciences communities. It became clear again and again that a practice-oriented guide for real research data management is missing and urgently needed [...]

Die Motivation für dieses Best-Practice-Handbuch zum Forschungsdatenmanagement (FDM) entstand aus zahlreichen Gesprächen und Interviews, die wir mit Anwendern aus den Bereichen Ingenieur- und Naturwissenschaften geführt haben. Dabei wurde immer wieder deutlich, dass ein praxisorientierter FDM-Leitfaden fehlt und dringend benötigt wird [...]

The protection of metallic combustion chamber walls and high-temperature blades in aircraft turbines by ceramic thermal barrier coatings (TBC) and air film cooling is crucial for increasing the efficiency and service life of the turbine. A further improvement in efficiency requires an increase in the gas inlet temperature, which necessitates the development of optimized WDS systems and cooling concepts. [...]

Green hydrogen, produced by water electrolysis from renewable electricity, is a highly recommended energy carrier in the energy transition. However, the oxygen evolution reaction (OER) on the anode suffers from sluggish kinetics, rendering the process inefficient. [...]

The global transition toward CO2-neutral energy systems requires a significant expansion of hydrogen technologies, with solid oxide electrolysis cells (SOECs) offering a highly efficient route for hydrogen production via high-temperature electrolysis. However, despite their superior efficiency, SOECs remain technologically less mature than low-temperature alternatives such as alkaline or proton exchange membrane electrolyzers. [...]

During the last 30 years, stimulated by the quest to build superconducting quantum processors, a theory of quantum electrical circuits has emerged and this theory goes under the name of circuit quantum electrodynamics or circuit-QED. The goal of the theory is to provide a quantum description of the most relevant degrees of freedom. [...]

The motivation for this best practice manual for research data management (RDM) resulted from many discussions and interviews that we conducted with users from the engineering and natural sciences communities. It became clear again and again that a practice-oriented guide for real research data management is missing and urgently needed. [...]