Hauptseite > Workflowsammlungen > Publikationsgebühren > Comparing and Quantifying Indoor Performance of Organic Solar Cells |
Journal Article | FZJ-2021-03130 |
; ; ;
2021
Wiley-VCH
Weinheim
This record in other databases:
Please use a persistent id in citations: http://hdl.handle.net/2128/28621 doi:10.1002/aenm.202101474
Abstract: With increasing efficiencies of non-fullerene acceptor-based organic solar cells, thin-film technology is becoming a promising candidate for indoor light harvesting applications. However, the lack of standardized comparison methods makes it difficult to quantify progress and to compare indoor performance. Herein, a simple method to calculate the efficiency of solar cells under any possible light source and illuminance with only using simple standard measurements (current–voltage curves and quantum efficiency) is presented. Thereby, equal evaluation conditions are ensured, so that indoor solar cells can be ranked and compared according to their efficiency. Efficiencies are shown to typically vary by ±20% when using different different light emitting diode spectra with color temperatures ranging from 2700 to 6500 K. Calculations based on a detailed balance model indicate that the optimal bandgap of the absorber material depends on the used light source and ranges between 1.75 and 2 eV. The approach is validated by comparison with literature data and many calculated efficiencies match well with experimental data obtained with a specific light source. However, some reported efficiencies cannot be reproduced with the model, which highlights the need to reassess low light measuring techniques. Furthermore, a script is provided for use by the community.
![]() |
The record appears in these collections: |